• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Cobra 29 2030 mosfet mod

Number15

Active Member
May 18, 2005
300
11
28
Stockton CA.
I did a mosfet mod 2030 and after the mod was done, R46 resistor burnt up. Did this mod before and never had this problem. I repaired R46 resistor and it burnt up again?? So its got to be something else. Any ideas were to look?? Thanks.
 

i would start by unsoldering the erf2030 then check the board for solder in any unwanted places. then replace the resister and see if it burns up. if it dont use a new erf2030 and isolaters.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.