zumlin said:I see CB20W workman finals on ebay alot also, they are supposedly 2sc1969 compatible. .
zumlin said:I see CB20W workman finals on ebay alot also, they are supposedly 2sc1969 compatible. Like Bushwacker said ERF2030's are good for modulators, lots of swing.
DTB Radio said:zumlin said:I see CB20W workman finals on ebay alot also, they are supposedly 2sc1969 compatible. Like Bushwacker said ERF2030's are good for modulators, lots of swing.
I do not recommend them for 29's, 25's, etc. I've seen to many fail catastrophically even when installed absolutely perfectly. For Galaxy/Connex and similar radios, they seem to work fine IF you pay careful attention to biasing (in the SSB units).
Not true. It really depends on how the 2030 is installed.The problem with the erf2030is when you are NOT running an amp..... the carrier power is a little on the low side. With the 1969 you can get more carrier power and still a good amount of swing. With the erf 2030 you run low carrier and lots of swing... alot of the time its more swing than you need.
Leave it alone. Its not worth the money to upgrade it to FETs.My question is,can i just change out the final or do i have to do the mosfet mod?.My radio is a connex 4400hp,it has the 2312s(dual) finals. thnx bigun :?: