• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Cobra 85 Odd problem?

Heywood

Member
Dec 19, 2020
26
36
23
112
Hello all. I have an old Cobra 85 am onky radio. Starting at channel 1, every fourth channel has no rx. All others are fine. What would cause this?
 

Either the 7.460 MHz crystal is bad, or the connection to it through the channel selector's contact points or the wires from the selector to the circuit board. Not a lot more than that can shut down channels in that pattern.

73
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.