try replacing the pot on the power supply board.
they are notorious for going out in these old radios.
just a guess.
LC
they are notorious for going out in these old radios.
just a guess.
LC
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
The Winners of the three Retevis radios 16 Anniversary giveaway are announced!! Click Here to find out if you won!
Cobra 89xlr
- Thread starter Ben Hebert
- Start date
Yep that's mine off the problems I removed the be-201 and my voltage went to 15.5v. Now I have to find replacement for it?
http://www.ebay.com/itm/5-pcs-PANAS...hash=item3ac646117b:m:mHGBEBY758uhmwMX_LqXMmg
choose a 500 ohm pot where it asks you which ones you want.
some people just replace the pot with two resistors that give them 13.8 volts.
LC
choose a 500 ohm pot where it asks you which ones you want.
some people just replace the pot with two resistors that give them 13.8 volts.
LC
I have them on the way. Now when that's back right I can trace the no transmitting problem finally
Replaced the vr-201 voltage it didn't Change the voltage going to the board. Pulled the final and checked it working right still nothing
Last edited: