• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Communication Power Inc FC70 need some help

Crambone

Well-Known Member
Jan 22, 2019
486
155
53
55
My FC70 stopped showing the lower digits on the display across the board. I pulled the display board out and retouched all the solder joints but still same issue. When I power off and on the bottom digits show for a quick second but then go out.
I don’t have a schematic and can’t find any docs on this unit?

could also use a copy of a CP400 Sams guide I believe it’s number 268?
 

Tramdr didn't post that, I did. Here's the manual that I also posted with those others about a year ago.
 

Attachments

  • FC-70 Installation and Operation.pdf
    1,001 KB · Views: 4
  • Like
Reactions: Woody-202

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated