• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Courier Galaxy VI...The good & the Bad?

I bought a Galaxy VI from Copper in 1989. It was DOA out of the box. I recall it having a Ranger EPTX11B board in it. LC7131 PLL. The Galaxy V had the same board. I think the Galaxy IV had a Uniden 142 board in it.
I have 2 of these in original boxes and both were doa , no receive . Anyone know the fix ?
 
Interesting.... my Courier Galaxy VI has a different board in it. I wonder if someone swapped the faceplate on the one I have before I bought it...

If it's just AM/SSB it's most likely going to have a form of the MB8719 chassis, then.



~Cheers~
Very old thread, but it actually had the old LC 7130 PLL.
The Galaxy with no 4,5, or 6 was a MB 8719.
Courier made a Galaxy, a Galaxy IV a Galaxy V and the Galaxy VI.
They also built a Ranger 23 model, these radios were made long before RCI started building clone boards and were all FCC approved standard 40 channel radios.

73
Jeff
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.