• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

DAK 9???


my dak 9 had low power output,tubes check above 95% but are not the factory,could this be the problem or could it be something else if so what??and how can i fix it,,,it will key about 1/8watt swing 4....???driver is a 6w6g something i cat read the other number..and the final is a 6l6wgb,are these normal crosses???



thanks

Legger
pimp.gif



</p>
 
my dak 9 had low power output,tubes check above 95% but are not the factory,could this be the problem or could it be something else if so what??and how can i fix it,,,it will key about 1/8watt swing 4....???driver is a 6w6g something i cat read the other number..and the final is a 6l6wgb,are these normal crosses???



thanks

Legger
pimp.gif



</p>
 
I have a DAK IX without tubes. Where do the tubes go? 6L6 AND 6DG6??? Thanks Ron
 

Attachments

  • 20121004_11.JPG
    20121004_11.JPG
    70.7 KB · Views: 8

dxChat
Help Users
  • No one is chatting at the moment.
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello