I have a Dak Mark X got on a trade. It will not transmit. R213 is blown and need to know what size it is. Also directly behind the 6dg6 tube is a small board with a choke on it. the small resistor is blown and I can not find out what it is. Any help would be appreciated.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Dak Mark X problems
- Thread starter copclyde
- Start date
oops, sorry. that was dak IX
here's the X
http://www.cbtricks.com/radios/dak/mark_x/index.htm
I think r123 is 1k
http://www.cbtricks.com/radios/dak/mark_x/index.htm
here's the X
http://www.cbtricks.com/radios/dak/mark_x/index.htm
I think r123 is 1k
http://www.cbtricks.com/radios/dak/mark_x/index.htm
Was it just me or did that schematic seem incomplete to anyone else? Where does wire 54 go after it leaves the RF driver? Where is the 6DG6 final tube? I know it's off the main board but no place in the schematic or layouts did I see any tube. If there is a tube shown here it's the best hidden one I've ever not seen.
- No one is chatting at the moment.
-
-
dxBot:63Sprint has left the room.
-
dxBot:kennyjames 0151 has left the room.
-
-
