Can anyone suggest a good quick connector for DX-500?
I have seen these on Amazon
Amazon product ASIN B0BWCLL37C
Thanks
I have seen these on Amazon
Amazon product ASIN B0BWCLL37C
Thanks
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
DC Connector for Amplifiers
- Thread starter skeeters
- Start date
This is what you need, Anderson connector;
https://www.ebay.com/itm/3702188055...d=link&campid=5336136228&toolid=20001&mkevt=1
Agreed. I have the red Anderson plugs on all my amplifiers. I have seen red, gray, and the blue ones pictured. If you have a butane torch it’s simple to melt solder in the metal pieces, dunk the wire and then snap them into the plastic plugs.
Get the gray, they are the standard.
These connectors should be crimped with an industrial type crimp tool BEFORE you add the solder.
I have had to repair a lot of them and amplifiers because of an insufficient electrical connection because they were not crimped first.
You cannot get a good crimp after solder is added.
These connectors should be crimped with an industrial type crimp tool BEFORE you add the solder.
I have had to repair a lot of them and amplifiers because of an insufficient electrical connection because they were not crimped first.
You cannot get a good crimp after solder is added.