this one has me stumped
DX2517 no power. Nothing to the switch. Nothing to the power board. I have house current going into the transformer and voltage coming out of it going into the bridge rectifier.
Coming out of the bridge rectifier I have nothing. There are 4 terminals on the bridge rectifier. I have 12.5 on the 2 terminals (yellow wires) coming from the transformer, But the red wire going to the 35v 10000 capacitor has zero voltage. (The final terminal ohms to ground). That should be my main voltage wire?
Bad bridge rectifier? I just got a new one in the mail from rf parts. Same issue. No voltage coming from the bridge rectifier.
Either I got a bad rectifier or I’m not doing something right.
I thought I could bypass it and jump 12 volts from an external 12 voltpower supply to the switch or power supply board and even the main capacitor just for testing purposes but it seems to short so I quit trying before I blow something else
DX2517 no power. Nothing to the switch. Nothing to the power board. I have house current going into the transformer and voltage coming out of it going into the bridge rectifier.
Coming out of the bridge rectifier I have nothing. There are 4 terminals on the bridge rectifier. I have 12.5 on the 2 terminals (yellow wires) coming from the transformer, But the red wire going to the 35v 10000 capacitor has zero voltage. (The final terminal ohms to ground). That should be my main voltage wire?
Bad bridge rectifier? I just got a new one in the mail from rf parts. Same issue. No voltage coming from the bridge rectifier.
Either I got a bad rectifier or I’m not doing something right.
I thought I could bypass it and jump 12 volts from an external 12 voltpower supply to the switch or power supply board and even the main capacitor just for testing purposes but it seems to short so I quit trying before I blow something else