Dentron MLA2500B-Harbach Kit Help Needed

[357]

I'm doing the cap-timer board kit for a ham buddy...
I'm ready to install the timer/rectifier board and have hit a snag.
The chart says 3T no connection and 4T says orange wire.
The original board has this reversed.
Do I just take my orange wire from the 3rd hole and put it to 4T?

 

[357]

ok I think I'm getting the hang of it...back tracing and verifying each wire to be sure.
Slowly but surely.
I'll touch up that 2T wire...

 

[357]

I'll test it later tonight after I triple check it.
I think I'm good though.

 

[357]

WE HAVE IGNITION!

 

[357]

I tested a old cap 167uf 0.44ohms

 

[BBB]

If you ever have a hard time finding replacement 8875 t00bs there is a 4CX400A t00b conversion available. Details here:

http://qro-parts.com/images/GS-36B/convert.pdf

Hope you get the 'ol t00b amp going again.

 

[357]

If you ever have a hard time finding replacement 8875 t00bs there is a 4CX400A t00b conversion available. Details here:

http://qro-parts.com/images/GS-36B/convert.pdf

Hope you get the 'ol t00b amp going again.

He's got a spare set, brand new with sockets.

 

[nomadradio]

He's got a spare set, brand new with sockets.

Sweet!

Just watch yourself on AM. It's really a SSB amplifier. AM and CW are hard on that tube. Has no margin for excess heat.

73