• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Mobile DIY: Inverted-V


Had time to kill at Mobile, AL. Opportunity spoke.

Finding a pair of 1,000-foot reels of proper wire wasn’t so bad as the Ingalls Shipyard isn’t far.

Think it’ll get out?

View attachment 35103

U.S.S. Alabama

.
Sometimes miss Mobile. Graduated High School there. Used to cut out across that causeway to Rest Area and catch skip to TX and other parts. Been through the Alabama and Drum may times. Used to be alot of CB operators around that area.
 
Sometimes miss Mobile. Graduated High School there. Used to cut out across that causeway to Rest Area and catch skip to TX and other parts. Been through the Alabama and Drum may times. Used to be alot of CB operators around that area.


I don’t hear much on AM-19 past the locals waving howdy, or about problems on the two Interstates. Not like OKC.
 
Sometimes miss Mobile. Graduated High School there. Used to cut out across that causeway to Rest Area and catch skip to TX and other parts. Been through the Alabama and Drum may times. Used to be alot of CB operators around that area.

I was stationed in Mobile from 1976-1980. There was a Barbeque place across the causeway there. Best Ribs I've ever had. Every time we go through mobile, I always keep an eye out for it, but I'm sure one of those hurricanes took it out.
 
I was stationed in Mobile from 1976-1980. There was a Barbeque place across the causeway there. Best Ribs I've ever had. Every time we go through mobile, I always keep an eye out for it, but I'm sure one of those hurricanes took it out.

The America I hope to still see versus the foreign-owned factories and farmland. Mom & Pop diners versus McTrash.

Americans reduced to wage-poverty and living in trailers.


S.O.S. is what needs to be keyed on the Vibroplex from Alabama.

.
 
  • Like
Reactions: walterjn and Tokin

dxChat
Help Users
  • No one is chatting at the moment.
  • dxBot:
    Tucker442 has left the room.
  • @ BJ radionut:
    LIVE 10:00 AM EST :cool:
  • @ Charles Edwards:
    I'm looking for factory settings 1 through 59 for a AT 5555 n2 or AT500 M2 I only wrote down half the values feel like a idiot I need help will be appreciated