I have a large tower going up and I was checking into the tower hazer to avoid having to climb the tower for work needing to be done or lowering the beam when storms come in. I am just wondering in these ar for RHON TOWER or if they will work with UNIVERSAL TOWER aswell? I know the Rhon has 2 bolts that are horizontal through each leg and the Universal has one long bolt that goes vertical through each leg so I was curious or afraid if these available hazers would still work?
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
DO THEY MAKE TOWER HAZERS THAT WORK WITH UNIVERSAL TOWER??
- Thread starter TonyV225
- Start date
I would contact Glen Martin Engineering directly at GlenMartin, Inc. Contact & Ordering Information and ask them. Their website just shows the Hazer installed on Rohn 20/25 and Glen Martin towers. No mention of Universal Towers at all.They may be able to make something that fits however.
If the face of the Universal tower is the same width as Rohn 20 - 25, then they ought to work, I think. Being naturally cheap, I made a 'Hazer' once to fit a Universal tower. Didn't get it up, nothing to do with the hazer, was something else. The Hazer slides over any normally protruding bolts holding the sections together. Or, if you're really desperate, you can put 'rails' on the tower face for it to slide on.
- 'Doc
Not putting the tower up had to do with city restriction.
- 'Doc
Not putting the tower up had to do with city restriction.