Years ago there was a common modification to use a regular dynamic mic on radios that came with electret condenser. You added a ceramic disk cap to the audio wire of the mic. For the life of me I can't recall the value. Was it .1uF? Anyone?
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Dynamic mic impedance matching
- Thread starter AA1QD
- Start date
Capacitor in series works as highpass filter. Lower value, less low/mid, lower output signal from cartridge.
I would use 1uF to not limit it, inside radio there are circuits will take care of it.
Mike
I would use 1uF to not limit it, inside radio there are circuits will take care of it.
Mike
- No one is chatting at the moment.
-
-
@ Catalyst 122:Who do I contact for a name change. I put in for it over a year ago and it says still under review.
-
-
-
@ BJ radionut:
Coffee and Ham Radios
Come join the fun with the friendliest group of hams this side of The Zed! We cover topics on every aspect of Ham Radio and Ham Radio Accessories, as well as ham adjacent! Join Chuck KK6USY and TheSmokinApe, as we discuss and discuss all things Ham Radio!
www.youtube.com
