Eleflow? El - I dontknow!

[guitar_199]

I could swear I have seen the brand Eleflow in posts on here.... where some of you have used them, or looked at them, or thrown them as far as you can see......

but... if anyone HAS used them.... how on earth do you order them?

IN today's marketplace.. they don't seem to have a web presence at all. NO place that you can go browse, select a product... and BUY it. A guy in the UK .... Weazle66 keeps showing up as distributor...and I found him as a seller on Ebay....but when I click to follow his link... he has NO PRODUCTS for sale. That is a weird way to run a business.

 

[nomadradio]

Too late.

Eleflow came and went.

A few years ago. So far everybody who sets up as a second source for the discontinued Mitsubishi final and driver transistors will make the parts and then just stop. Forever. The stuff they did make will trickle out the pipeline until it's gone.

Forever. Just like the original Mitsubishi parts.

73

 

[tecnicoloco]

Try ebay the seller is from the UK

or icamanufacturing in the US but they are HG

 

[nomadradio]

"HG" is Hua Gao. A chinese company as it turns out.

These guys sold some to me, and they worked okay. Scroll down this page for radio finals. https://www.icamanufacturing.com/transistor

Get 'em while they're hot. If experience is any guide, HG will get tired of making these and move on, eventually.

73

 

[Smokinone]

"HG" is Hua Gao. A chinese company as it turns out.

These guys sold some to me, and they worked okay. Scroll down this page for radio finals. https://www.icamanufacturing.com/transistor

Get 'em while they're hot. If experience is any guide, HG will get tired of making these and move on, eventually.

73

There's a guy on the bay selling them for 15.99 a pair, shipped.

 

[sp5it]

I installed more than 20 Eleflow finals. They worked as it should.

 

[guitar_199]

Overnight.... I actually got a return email from weazel66 telling me that there was no web front..... he plopped in a list of transistors he had...... and that was it.

I am actually starting to refocus on finding any "dead hulk" radio I can find to scarf parts out of..... transistors.... various "cans"...... toroid/coil parts.........

 

[Low_Boy]

I have had bad luck with Eleflow. I have had great luck with the HG and have been using them fore a while with great results. Unfortunately they stopped producing the MRF497.

 

[guitar_199]

Where do you get those LB? If you don't mind me asking......

I have had bad luck with Eleflow. I have had great luck with the HG and have been using them fore a while with great results. Unfortunately they stopped producing the MRF497.

 

[Low_Boy]

Where do you get those LB? If you don't mind me asking......

ICA Manufacturing. For the HG.

 

[codecxbox]

This is the same dilema that the M0nka project has..it relies on very specialized Mitubishi mosfets and they are getting scarce..Ive been proposing them to consider to propose a procedure to replace those with generic IRF520..