You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Hello, I have a Emperor 5010 that I hooked up the power wires to backwards by accident. I replaced the diode D173 (witch was blown apart) and it still don't seem to be transmitting.
Does it actually switch from RX to TX mode when you key? Are you just getting not power out at all? You're probably going to have to pull the schematic from CBTricks and work backwards from the power connector to find what else blew.
This forum does not allow a single user to have more than one username. If anyone wants to change their username contact an admin and it will be done. Multiple accounts belonging to the same member will be deleted without warning.