• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

First Japan Contact Today

kd-5-bgt

W9WDX Amateur Radio Club Member
Nov 10, 2007
1,176
93
58
Joplin Missouri area
I was surprised when I made a call to JJ-2-LPV and he replied right back....was on 17 meters at about 4:45 PM centeral time signal report was a 5/6 to 5/7 both ways

Not to bad for 100 watts through a ocf windom at 38 feet
:thumbup:
Gogo Icom power !!
 

Ja land likes to play on 15 meters also, worth monitoring.

Robb the more I study that Imax 2000, the more I am starting to like what I see, Friend has one and I could not believe the bandwidth when I swept it with the analyzer.

$ for $ that Imax is looking like it is one antenna that is hard to beat.
 
Ja land likes to play on 15 meters also, worth monitoring.

Robb the more I study that Imax 2000, the more I am starting to like what I see, Friend has one and I could not believe the bandwidth when I swept it with the analyzer.

$ for $ that Imax is looking like it is one antenna that is hard to beat.
I came to the same conclusion too.
It is practical for da money spent.
I'll be checking out 15m and 12m more often now; have logged some there. I've used it on 10m and 17m mostly so far. 11m too - of course.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.