I need some guidance regarding LSB on an FT-101E. It transmits and receives approximately 3.25 -3.5 khz above the given frequency. This was confirmed over the air as well as with a seperate radio nearby. USB and AM transmit and receive correctly. I can't find anything in the service manual that addresses SSB alignment specifically so I was hoping for some help. The radio has been recapped, the standard transmit/receive trimmer peaking was done, the rig has 6 VDC on the dot and the receive/clarifier/transmit are all at 3.672 VDC. Any help would be greatly appreciated. Thank you.