Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

FT2900E

A

ahasverus

Member
Dec 2, 2011
74
3
18
dear OM
I use the ft2900 e
When I use the freq tx 145.600 the rx freq jumps to 145.000
also tx 145.800 rx 145.200
and all freq between 145.600 and 145.800

but using tx 145.595 no jump to 144.995
tx 145.805 no jump to 145.205
is this normal
tried to change in menu
(49 to 52) but cannot find the way IF it is possible
thank you for advice
 

Are you trying to use 145.600 as a SIMPLEX freq? If so your automatic repeater offset is shifting the RX down 600 to hear the repeater...Try looking at the display is there a (-) showing...if so that is the issue...Menu 43 I believe sets that...so it can be turned off...
See page 20-21 of the Op- manual to Enable/Disable auto Offset...
All the Best
Gary/W9FNB
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom