Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Galaxy 99V

C

CCB0703

Member
Jan 24, 2015
7
0
11
55
Just a quick question. I just received a Galaxy 99v not the v2 back from tech who alligned it and was wondering what the older 99v being a dual final radio should be showing on my meter with a 50ohms dummy load.

A realize that a few extra watts at this level does not amount to much but just curious. Any opinions are appreciated...
 

Stock they are listed as 10w on AM, and 25 watts pep on SSB. If it's been tuned and aligned it may do anywhere from 25-40 watts on AM. SSB should be about the same. Maybe a bit more.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom