Need a little help or suggestions please. Galaxy DX959 works well but has no SSB receive. Transmit works on SSB. AM works good on both transmit and receive. Scratching my head or is it something simple.... Thanks for any help on where to look....
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Galaxy dx959 no SSB receive
- Thread starter Bob Pyle
- Start date
What do you have on hand as troubleshooting tools?
A basic multi meter would let you check for simple faults.
Do you know which component is the sideband crystal filter? Quick test is to use the "digital manual signal injector". A small screwdriver with your index finger laying alongside the metal shaft. This turns you into a receiving antenna. Touching one, then the other of the two signal pins on the solder side of the pc board below this filter should get you a burst of noise. Be sure the volume is turned up first.
If you can't hear anything that way, the problem is downstream from that filter.
This isn't one of those "they all do that" faults.
73
A basic multi meter would let you check for simple faults.
Do you know which component is the sideband crystal filter? Quick test is to use the "digital manual signal injector". A small screwdriver with your index finger laying alongside the metal shaft. This turns you into a receiving antenna. Touching one, then the other of the two signal pins on the solder side of the pc board below this filter should get you a burst of noise. Be sure the volume is turned up first.
If you can't hear anything that way, the problem is downstream from that filter.
This isn't one of those "they all do that" faults.
73
Great. I'll give it a try. Thanks!! If I find it I will let you know....
- No one is chatting at the moment.
-
-
dxBot:63Sprint has left the room.
-
dxBot:kennyjames 0151 has left the room.
-
-