Sidebar Sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Galaxy Saturn Turbo frequency problem

B

Benchdog

New Member
Sep 22, 2013
1
0
1
Hello to all. I have a Galaxy Saturn turbo that does not transmit or receive where the frequency display says. One of the alignment test points says to check and adjust VC-2 for 17.305 mhz, but the freq. counter says it is oscillating at 19.580 mhz. This is in TX and RX. It is the EPT 2950-13Z board.

BTW, VC-2 has no effect on the frequency adjustment.

Anyone have any ideas where to go next?

thanks in advance,

Benchdog
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ Wildcat27:
    Hello I have a old school 2950 receives great on all modes and transmits great on AM but no transmit on SSB. Does anyone have any idea?
  • @ BJ radionut:
  • @ ButtFuzz:
    Good evening from Sunny Salem! What’s shaking?
  • dxBot:
    63Sprint has left the room.
  • dxBot:
    kennyjames 0151 has left the room.


      Top Bottom
      Back