Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Galaxy Saturn Turbo frequency problem

B

Benchdog

New Member
Sep 22, 2013
1
0
1
Hello to all. I have a Galaxy Saturn turbo that does not transmit or receive where the frequency display says. One of the alignment test points says to check and adjust VC-2 for 17.305 mhz, but the freq. counter says it is oscillating at 19.580 mhz. This is in TX and RX. It is the EPT 2950-13Z board.

BTW, VC-2 has no effect on the frequency adjustment.

Anyone have any ideas where to go next?

thanks in advance,

Benchdog
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom