OK, here goes my galaxy saturn meters stoped working, both meters and theres no reading at meter when i used my test meter? I think its the AGC diode but dont know were it is and need some help Thank u.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Galaxy Saturn
- Thread starter Number15
- Start date
No one?? weres all the Techs?? anyone had a meter problem in other base radios, with both meters?? Thanks.
Do these meters get their power from a separate 12v source? Are they on their on daughterboard? If so, perhaps the dc feed to that board is bad.
Galaxy Saturd Service Manual:
http://buttfuzz.net/downloads/cb/galaxy/galaxy_saturn_service_manual.pdf
Check for voltage going to the EPT0SSB81Z function selector board right quick like, too...
Galaxy Saturd Service Manual:
http://buttfuzz.net/downloads/cb/galaxy/galaxy_saturn_service_manual.pdf
Check for voltage going to the EPT0SSB81Z function selector board right quick like, too...
Thanks buttfuzz, i tracked it down there was no voltage at meters. It was a cold solder joint. Dam galaxys are famous for lol.
Hooray!
Great job, dude!
I had a Galaxy Saturn for many, many years until the God of Lightning decided he wanted it more than I.
Teamed up with a D104, those radios have a sweet, sweet on-air sound.
73,
Rob
Great job, dude!
I had a Galaxy Saturn for many, many years until the God of Lightning decided he wanted it more than I.
Teamed up with a D104, those radios have a sweet, sweet on-air sound.
73,
Rob