• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Give me your best educated guess!

NightOwl3261

Well-Known Member
Jul 24, 2020
140
202
53
66
So I pulled out my RCI2970n2 from retirement, and here are the symptoms: it has an on/off amp switch. Amp off 10 swings to 40. Amp on 20ish swings to 40. This is on s real peak reading meter. The power supply is more than up to it. It is running on a brand new power supply cable from Bells. Got a good guess so I can determine to invest in a repair or just leave the amp off and run it into an amp?
 

Retirement?

Geriatrics for the Elderly - Radios
upload_2020-8-15_10-32-24.png

Since technology has gone way too far ahead - the replacements for the original- if it used Pills let alone the MOSFET ones, may not be available as OEM. The upgrade repair may not be worth it.

Best to keep it stock and use it with the amp off.

By symptoms alone - you lost one pill of the pair that's in there now.
 
Retirement?

Geriatrics for the Elderly - Radios
View attachment 39643

Since technology has gone way too far ahead - the replacements for the original- if it used Pills let alone the MOSFET ones, may not be available as OEM. The upgrade repair may not be worth it.

Best to keep it stock and use it with the amp off.

By symptoms alone - you lost one pill of the pair that's in there now.

Thank you! You talked me into it! Scott
 
  • Like
Reactions: Handy Andy

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.