• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

HAM BIG MAC

yes they are a little bendy, i had mine in the early to mid 80's on 68ft of unguyed scaffold pole twinned up for the first 48ft, the whole lot swayed in the wind, in high winds the groundplanes would go past vertical with the radiator pointing at the floor, mounted like that it survived without a problem, in calm weather it outperformed my avanti sigma4,
its hard to decide which of my verticals performed the best the big mac or the vector4000 hybrid, it would be a close call imho.
 
bigmac1.png


bigmac2.png


bigmac3.png
 
Last edited:
Well, I can certainly see where an antenna such as this one (vertical array) would produce more gain than others, so it ought to perform well, in general. I can also see where it's a 'kloogy' mess, too complicated and 'flimsy' for the typical bad weather around here. Simplifying the thing, better engineering(?), would certainly not be a bad thing. 'Course that's going to drive the price of it up. Not sure if it would be 'worth' the effort, really.
I couldn't tell from the diagram, but is there an insulator above that 1/4 wave section? If not, then it's not a vertical array, gotta separate those sections electrically first. If that top coil is supposed to do that, then it's much too small (mechanically weak). Don't see any evidence of it doing the 'separating', and in that case it isn't a vertical array at all, just a 7/8(?) loaded vertical antenna. And considering the radiation pattern of a 7/8 wave, not very desirable at all (not 'flat' at all, good NVIS though).
Oh well, beats me...
- 'Doc
 
doc there is an insulator above the lower 1/4wave, what the makers call the phasing coil connects either side of the insulator, definately not just a 7/8wave with 6 x 1/4wave radials,
i agree it would be very expensive to make a good quality big mac today,
an interesting and great performing antenna,
maybe i should convert my i10k:D
 
7732granitestate,
That 'choke' thing at the feed point, also reminds me of a 'Big-Mac'...
(sorry, couldn't resist...all puns intended)
- 'Doc
 

dxChat
Help Users
  • @ BJ radionut:
    I am beginning the packing process...XENIA bound Going "Lite": this year....2 items for sale...Rig #1 = FT-920/Gud to Ex condition/Hand Mike/pwr cord/manual (NO BOX) ... #2 = My 1 owner FT-950....EX condition...Original Shipping Double Box/Factory Manual/Never used hand mike...Booths 9107-9111...Ya'al come by say hello...
  • @ BJ radionut:
    Incoming Region Produces X3 Solar Flare
    May 15, 2024 @ 14:55 UTC
    Another major solar flare, but this time from an active region just beginning to turn into view off the east limb. It is possible that the group responsible is old AR 3654 from the previous rotation. The latest flare, an X2.99 event just peaked at 14:38 UTC (May 15). Stay tuned
  • @ ButtFuzz:
    Everything is El Dead-o. Joy!
  • @ ButtFuzz:
    Please advise me to what is a good replacement mic for my SR-497HPC... Answer: 497 is "wired like Cobra", so many choices available. That radio does not need a power mic, so purchase a stock "coffin style" mic with a decent cord, like the ones that Astatic uses. The Superstar DM-507 is my go-to. https://www.ebay.com/itm/3050474478...adANq91JSiEEnz8EGqPJRBloTgEyaVsBoCtoMQAvD_BwE $12.99 + .99 cent shipping.