Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Help making Rj45 to 4 pin mic adapter please

M

moonrakercat

New Member
Jan 19, 2024
14
7
3
59
I've purchased a 5555n ii and need to make an adapter for this radio as my mics are 4 pin - I found one for a stryker online but not sure of strykers wiring.

My mic is a turner - anyone can point me in the right direction it would be appreciated ! (I have a cat 6 cable and a 4 pin male end - just need to get the wiring correct )

Thanks
 

Somewhere in wwdx I posted a photo with the anytone rj45 pinout but I'll have to find it.

Better yet, just go to the stryker web site and it'll be the same as the stryker 25mc rj45 pinout. That should get you going.
 
Last edited:
  • Like
Reactions: moonrakercat and H1driver

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom