i have looked and looked for this answer on the net ,,, haven't found it yet , figured id ask here ..
i have a cobra mic that was given to me ,, its alot thinner then the antistatic i have , but anyways the only thing it says on the back of the mic is
dynamic microphone
1mp. 500ohm
made in korea
the wires in side are red , purple , black , and a bare wire . i have seen meny posts that say this
1- shield
2-audio
3-transmit
4-receive
im guessing shield is the bare wire , but the rest i dont know what they are to put them where they go . it is going to be hooked to a 4 pic jack for a cobra radio..
thanks for any help..
i have a cobra mic that was given to me ,, its alot thinner then the antistatic i have , but anyways the only thing it says on the back of the mic is
dynamic microphone
1mp. 500ohm
made in korea
the wires in side are red , purple , black , and a bare wire . i have seen meny posts that say this
1- shield
2-audio
3-transmit
4-receive
im guessing shield is the bare wire , but the rest i dont know what they are to put them where they go . it is going to be hooked to a 4 pic jack for a cobra radio..
thanks for any help..