• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Hopefully this turns into a find!

when you want to get an existing tower for cheap, or free, you don't go to the owner's house and ask about it; you go to all the neighbors' houses and ask them to sign a petition regarding how it's an eyesore.

then after the pressure mounts, you casually let the owner know that you can help them solve their problem.



KIDDING!!!!
LC
 
Good luck!

And just to put it here......

Think of a "gin pole" as a "minimal/small crane".
It usually clamps on to one leg of the section BELOW the one you want to remove... and is tall enough to stick up ABOVE the one you want to remove....
It has rope and pulley.....
You clamp below, tie the rope/cable up to the top of the section you want to remove, position yourself below the section you want to move and pull or crank on the rope or cable... to pull the upper section off of the lower....and then you can lower it to the ground.
 
  • Like
Reactions: G-Golly Wally

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.