-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
HR-2510 bad ssb output audio
- Thread starter codecxbox
- Start date
Probably not. Sounds more as if the SSB limiter, or ALC has been turned up too high.
A 1 kHz tone into a SSB transmitter produces a carrier coming out of the transmitter. And if this produces a 35 Watt carrier from the radio, the current drain will look crazy high.
Until something overheats and fails.
Might have another cause, but that's what this sounds like. The radio fell into the hands of a wattmeter-obsessed tweaknician. Most especially, one who didn't listen to the SSB transmit after tweaking it.
It will last longer and sound better turned down to about 25 Watts PEP on sideband.
73
A 1 kHz tone into a SSB transmitter produces a carrier coming out of the transmitter. And if this produces a 35 Watt carrier from the radio, the current drain will look crazy high.
Until something overheats and fails.
Might have another cause, but that's what this sounds like. The radio fell into the hands of a wattmeter-obsessed tweaknician. Most especially, one who didn't listen to the SSB transmit after tweaking it.
It will last longer and sound better turned down to about 25 Watts PEP on sideband.
73
