• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

HR 2510 Display Problem


look for a blue resonator near the main cpu, it says something like 4mhz on it,
i have known those to come adrift and lose the display.
 
if it is that resonator it most likely will just need resoldering, its a long shot but possible as i have seen it before.
 
no display..

Does the radio still transmit?

If so, check the 3 capacitors on the display PCB. One of those could (usually) short out and the display will goe blank.

Also check the voltage regulators on the Microprocessor board.
One is 5v one is 8v. the output pin is right most pin.

Roger
 

dxChat
Help Users
  • No one is chatting at the moment.