Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

HR 2510 RF meter problem?

TIN_CAN said:
Bingo!!!!! I lifted one side of the caps and problem solved all screws in and case on....thanks a million Jeff!:thumbup:
Click to expand...

Maybe, just maybe this explains why my meter will vary from time to time on several of my 2510s! Seems if the is high moisture in the air the meters acts up a bit, if dry it seems to be fine. I know all to be well with the antenna and a external meter proves it.

73 mechanic
 
Blackpaw said:
same issue with mine. I pulled all the cable connectors to the board that has the LCD display and re-seated them. solved my problem. hope this helped. 73s greg
Click to expand...
The connectors that connect the various boards, and sub-assemblies are a known problem on the '2510. Re-seating them will often cure some problems. I sprayed a little DeOxit D5 onto the connectors to help improve the reliability.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom