Hi guys. I am sure some of you remember me, I was very busy over the last few months which left no time for the radio or this forum. This morning I fired my radio up, to find to my knowledge, my jumper was bad. When I key up with my swr meter in line my rf meter on the radio moves just a little bit and the swr warning light comes on. The external swr meter shows a 1.8:1 If I take the meter out of line includeing the jumper I have a 1.5:1 on the radio and the meter moves fine, also the swr warning light goes off. My next question is if the jumper is bad where could I buy quality coax for a resonable price. I forgot to add I am using a galaxy 2547 and the coax wouldn't see over a couple of hundred watts.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
I am back!!
- Thread starter nat19
- Start date
B
BOOTY MONSTER
Guest
welcome back 19 .
heres some coax jumpers .
http://www.sparkyscbshack.com/Coaxcable.html
if you only have the radios built in meter for vswr testing now id suggest getting a external one
heres some coax jumpers .
http://www.sparkyscbshack.com/Coaxcable.html
if you only have the radios built in meter for vswr testing now id suggest getting a external one
I do have an external radio shack swr meter but I can't use it to test my swr because my jumper is bad. Also I am just wanting a 3 foot jumper.
Everything you could want and more at reasonable prices.
The WireMan - Your source for coax, connectors, wire, baluns,and more!
The WireMan - Your source for coax, connectors, wire, baluns,and more!