• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

IC-7000 ext display


I use a little 7" Coby portable TV with my 7000. It's not an HD tv and doesn't need to be for the 7000. Anything larger than 7" or 8" and the on-screen text will start to look blocky. (tired it with a larger computer monitor that I hacked up a cable for. Looked BAD)
The output from the 7000 is not that high at all. So, you should be fine with what you are getting. It certainly does make it easier to see settings when you change them too!
trucker
 
I use a little 7" Coby portable TV with my 7000. It's not an HD tv and doesn't need to be for the 7000. Anything larger than 7" or 8" and the on-screen text will start to look blocky. (tired it with a larger computer monitor that I hacked up a cable for. Looked BAD)
The output from the 7000 is not that high at all. So, you should be fine with what you are getting. It certainly does make it easier to see settings when you change them too!
trucker

Yea I tried it on my 40" HDTV at home and each number was in blocks about 1x1 " blocks. LoL

Sent from Outerspace, on the DarkSide of X.
 
Here is the new display in action I couldn't be happier.

http://s1101.photobucket.com/albums/g424/WorldWideDX/?action=view&current=2011-12-07_12-29-35_73.jpg
2011-12-07_12-29-35_73.jpg


Sent from Outerspace, on the DarkSide of X.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.