What does the wax cover. not the cans. The whole area that the wax covers what is that??? and on the bottom that little cover what is that?
big red wants to know
see ya
big red wants to know
see ya
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
In side the radio
- Thread starter bigred222
- Start date
the wax over the parts is for temperature.
they put that wax on there so that temperature sensitive components arent as affected by the ambient temperature.
this helps with freq. drift, etc...
the metal plate on the bottom is for RF shielding.
this is usually used in receiver circuits so they dont pick up spurious signals from other parts of the radio.
LC
they put that wax on there so that temperature sensitive components arent as affected by the ambient temperature.
this helps with freq. drift, etc...
the metal plate on the bottom is for RF shielding.
this is usually used in receiver circuits so they dont pick up spurious signals from other parts of the radio.
LC
dxChat
- No one is chatting at the moment.
-
-
@ heartbreaker3473:Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
-
@ AudioShockwav:Wes, it's better if you start a thread on the main forum, more people are going to see your question.
-
-
@ heartbreaker3473:I put it in the general disscution help area and started a new thread. Thank you for letting me know.