What does the wax cover. not the cans. The whole area that the wax covers what is that??? and on the bottom that little cover what is that?
big red wants to know
see ya
big red wants to know
see ya
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
A Winner has been chosen for the 2026 July 4th Retevis RA89R Giveaway! Click Here to see who won!
In side the radio
- Thread starter bigred222
- Start date
the wax over the parts is for temperature.
they put that wax on there so that temperature sensitive components arent as affected by the ambient temperature.
this helps with freq. drift, etc...
the metal plate on the bottom is for RF shielding.
this is usually used in receiver circuits so they dont pick up spurious signals from other parts of the radio.
LC
they put that wax on there so that temperature sensitive components arent as affected by the ambient temperature.
this helps with freq. drift, etc...
the metal plate on the bottom is for RF shielding.
this is usually used in receiver circuits so they dont pick up spurious signals from other parts of the radio.
LC
dxChat
- No one is chatting at the moment.