-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Just for kicks
- Thread starter IDIeselman
- Start date
Dang, with all the experts on this forum, I thought this post would have run it's course by now.
I'll start
Stryker-490SR
I'll start
Stryker-490SR
Not to be critical but placing a 100 watt PA directly over the main PC board with no RF shielding is a major no no. With the echo board and all the other sensitive low level electronics in that compartment, I'd be very impressed if there was no RF feedback. I see the DC choke and cap are there to filter the power line. That's good but some shielding would be better.
Thanks Shockwave, I actually have no idea what all these mods are. I just bought the radio for $50.00 from a local driver, he claimed he had a lot of money into it and it does seem much louder that my old one which had only a modest tune. It performs very well and I was hoping the members could help me out a bit as it seems there are a lot of jumped traces and add on wires.