• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Little tarheel ii install

IMG_20200528_191535442_HDR.jpg
 
  • Like
Reactions: Slowmover
My Rigrunner has two 4 Amp combined USB ports. I had my phone plugged in and it got hot. Hot enough I couldn't hold it.

I’ve avoided the USB-equipped models from my searches. Any brand. While it seems “convenient”, I can’t really see the utility.

At first, it seemed good. As a truck driver I’ve several pieces of equipment — which are business tools — to keep charged. As power cabling is well beyond requirement, this seemed good.

The idea of noise or feedback was enough to exnay that. (I otherwise use a multi-plug 12V cigar lighter device for those). I can disengage that to check noise and 3-4 items are instantly OFF.

I’d ask West Mountain Radio. I like the product quality and my single (unneeded) return for service gave me the warm fuzzies.

.
 
  • Like
Reactions: fourstringburn
I am going to write them about it. It shouldn't have got that hot with a 4 amp rating. Also, that might be why the dude sold it to me. I bought it at the Shriner's Hamfest last August. Just got around to using. It runs fine with my 12 volt stuff, but blistering hot on USB side.
 
  • Like
Reactions: Slowmover

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.