Looking for a few transformers

[Tweetybird]

300vdc 18watts 500v dc 32w 600v 42watts

 

[Tallman]

I have some transformers from KLV-1000's. You can check the schematic and see if it is what you want.

 

[Captain Kilowatt]

300vdc 18watts 500v dc 32w 600v 42watts

Those are pretty puny transformers. What is the intended purpose? Those ratings you quoted are only good for less than 100 milliamps. Actually 60, 64, and 70 mA respectively.

 

[Tweetybird]

this

 

[Tweetybird]

What specs say the require

 

[Tweetybird]

Still researching it a guy is sending a schematic

 

[Tweetybird]

 

[Tweetybird]

Couple more

 

[Tweetybird]

This too I wanted a new cb

 

[Tweetybird]

What specs say the require

I look again almost out of ink manual printed kinda bad I buy another cartridge

 

[BJ radionut]

For external base use supply requirements are:
6 volt AC or DC = 4 amps (filaments) or 12 volts = 2 amps
300 volts DC = 100 ma (30 VA)
600 volts DC = 300 ma (180 VA)
These ratings will give full 60-watt input and give a slight amount of headroom on transformer spec ratings.

 

[BJ radionut]

https://www.hammfg.com/electronics/transformers/classic/200
Plus Modulation Transformer:
https://www.hammfg.com/electronics/transformers/classic/2000