Looking for some rotary switch decals.

[dss56]

Hope this is correct place to ask as I could not find the correct place to ask.

Im building a project box that has a 5 position rotary sw and maybe an 8 position switch.
I have tried ebay and other sources to locate the 5 position # plate that would go on the front panel to show what # you are on.

Any suggestions as to how I could make these and ones that will stick to the front panel.
It looks like a 1 inch round and the 3 would be at 12 oclock.
Label places want an arm and a leg for 200 1 inch labels.

SO suggestion on how I can get these made.
Even of someone in the group could do I would pay them a reasonable price.
the labels would need to be cut with a 1/4 hole in the middle to go over the rotary switch.

thanks

 

[sp5it]

I do that in CorelDraw!
Maybe this: https://www.frontpanelexpress.com/front-panel-designer# will work for you.

 

[unit_399]

dss56 -

Use the following link:

https://www.electronicplus.com/content/ProductPage.asp?maincat=ch&subcat=ctr

Click on the link . Scroll down until you see "dial and meter markings" near the bottom of the page.
Click on the camera icon on the right hand side to view the dial transfers.

Hope this is what you're looking for.

- 399

 

[dss56]

thanks for the links

Unit_99 i did see all the dry transfer but nothing with # so I think I will try to make my own. Places with prices are outrageous. Might buy 1 of those cricut machines or use a program called EasyCut can make in there and print on some sticky vinyl then cut with an Exacto Knife. The cricut machines would be great but cost $300 plus materials.
thanks again guys for the suggestions

 

[H1driver]

https://www.redbubble.com/shop/volume+control+stickers