Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Materials for the Moxon

mb91w126 said:
any specifics on the feed point gap width?
if I want to mount an so-239 at the feed point can I use #16 copper wire to connect both sides to it?
Click to expand...
There is no specific info that I have found for that gap. I have used 1". You can use #16 wire. Keep it short.
 
  • Like
Reactions: mb91w126
I used one of these.

palstar-dp239_web1.jpg
 
  • Like
Reactions: mb91w126

dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom