Hi all, I'm considering a change of mike from the stock mike on the Anytone 5555 and as it has a live wire I dont know which mike I should get in its place. There's no urgency, it's just that I find it to be too small for comfort. I'd prefare a bigger chunkier one that I can get a good grip on. Its just the mike wiring that I'm a wee bit nervous about.Would the 4th wire and pin at the plug end have to be disconnected or are there other mikes that have the 4th pin live as well. Would the live wire be the wire for current to flow to enable the up/down chanell buttons at the top of the mike to work.All help is appreciated Thanks.