-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
montgomery ward GEN 680A won't power on
- Thread starter megatron
- Start date
LOL Jeff. . . It was in the title - and I didn't see it!
Brilliant!
Anyway . . .couldn't locate a schematic for it. But the protection diode is easy to find in any radio. It is always real close to where the 12v power comes right into the board. Just follow the power flow in; can't miss it. So Megatron, find that diode and clip it; then replace it with a 1n4003 diode, and then it should be as right as rain again. Cost for that part is anywhere from 5 cents each to $2 for three at Radio Shcak or your local electronics parts house. Common, easy to get part. No problemmo . . .
Brilliant!
Anyway . . .couldn't locate a schematic for it. But the protection diode is easy to find in any radio. It is always real close to where the 12v power comes right into the board. Just follow the power flow in; can't miss it. So Megatron, find that diode and clip it; then replace it with a 1n4003 diode, and then it should be as right as rain again. Cost for that part is anywhere from 5 cents each to $2 for three at Radio Shcak or your local electronics parts house. Common, easy to get part. No problemmo . . .
Last edited:
- No one is chatting at the moment.
-
-
dxBot:63Sprint has left the room.
-
dxBot:kennyjames 0151 has left the room.
-
-
