Motor Maul Manual

[Alexis Mercado]

Hi guys. I have a 200A X-Force motor maul. I am looking for the user manual. Where do I download it ?

 

[AudioShockwav]

Best bet is contact Carl he most likely built it and should be able to answer your questions.

Custom Amplifiers | Carl Built

Discover Custom Amplifiers from Carl Built. Experience high-quality, efficient designs with 30 years of expertise.

carlbuilt.net

73
Jeff

 

[9C1Driver]

At best you might get a simple one page print out of basic instructions. There are no user manuals for any of these 11m amplifier and related products for obvious reasons. Best bet is do what was suggested above.

 

[linearone]

At best you might get a simple one page print out of basic instructions. There are no user manuals for any of these 11m amplifier and related products for obvious reasons. Best bet is do what was suggested above.

I provide a manual for my amplifiers. But I'm definitely in the minority.

 

[Alexis Mercado]

At best you might get a simple one page print out of basic instructions. There are no user manuals for any of these 11m amplifier and related products for obvious reasons. Best bet is do what was suggested above.

Hi. I wish I had a simple one page print out. The seller didn’t have a user , instruction manual. I don’t have problem with the electrical cabling, my doubt is how to connect the radio and the amplifiers to the motor maul.

What goes to the coax input of the motor maul, the cb radio or the 100w amplifier ? The 4 pill goes before or after the motor maul ?

Thanks in advance for any help you may provide

 

[linearone]

Hi. I wish I had a simple one page print out. The seller didn’t have a user , instruction manual. I don’t have problem with the electrical cabling, my doubt is how to connect the radio and the amplifiers to the motor maul.

What goes to the coax input of the motor maul, the cb radio or the 100w amplifier ? The 4 pill goes before or after the motor maul ?

Thanks in advance for any help you may provide

CB goes to the motor Maul input. Never put anything more than the radio into the motor Maul

 

[9C1Driver]

Hope you get it all setup. like to hear how well that works for you.

 

[nomadradio]

Never put anything more than the radio into the motor Maul

The MotorMaul is triggered by the radio's carrier, passing through the two coax sockets. Any more power than a barefoot radio will end in tears.

73

 

[Alexis Mercado]

Nomad radio:

I tested this motor maul triggered by my Striker radio. It works as expected. Thanks.

 

[nomadradio]

Rock on!

73