Need the 10 crystal layout on the top side of a Kris 23+ cb tube radio

[danmcclain]

I've looked everywhere even Sams does not show the order of the 10 crystals behind the channel selector. I need the order of M4 thru M13. Help please. Thanks.... Dan

 

[NZ8N]

Sams #45 ??

 

[TM86]

Not sure if this what you mean by "order of M4 thru 13", but I'm giving it a shot.

M4 - 14.970 MHz
M5 - 14.960 MHz
M6 - 14.950 MHz
M7 - 14.990 MHz
M8 - 23.540 MHz
M9 - 23.290 MHz
M10 - 23.340 MHz
M11 - 23.390 MHz
M12 - 23.440 MHz
M13 - 23.490 MHz

That's off Sam's CB #45, (thanks NZ8N) page 78. Had to use a magnifying glass to read the numbers. Apologies if that's not what you wanted or if I got any wrong, but at least you know where to look to check my work.

 

[danmcclain]

Not sure if this what you mean by "order of M4 thru 13", but I'm giving it a shot.

M4 - 14.970 MHz
M5 - 14.960 MHz
M6 - 14.950 MHz
M7 - 14.990 MHz
M8 - 23.540 MHz
M9 - 23.290 MHz
M10 - 23.340 MHz
M11 - 23.390 MHz
M12 - 23.440 MHz
M13 - 23.490 MHz

That's off Sam's CB #45, (thanks NZ8N) page 78. Had to use a magnifying glass to read the numbers. Apologies if that's not what you wanted or if I got any wrong, but at least you know where to look to check my work.

Thank you TM86 for the reply. What I need is the order that they are installed, I know that M4 is in the number 7 slot, need to know what slots the other are in. They don't seem to be in numerical order...

 

[danmcclain]

Thank you TM86 for the reply. What I need is the order that they are installed, I know that M4 is in the number 7 slot, need to know what slots the other are in. They don't seem to be in numerical order...

I have Sams CB #45, but the crystals are covered with shrink wrap, can't tell where each crystal goes....

 

[danmcclain]

I have Sams CB #45, but the crystals are covered with shrink wrap, can't tell where each crystal goes....

Update: I found someone with a Kris 23+ and got the info I needed.... Thanks everyone for your input...