-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
Needle swings backwards, power is too low to calibrate SWR meter and scratchy audio
- Thread starter Turbo T
- Start date
PLL 02A MODS
http://www.hardtimez99.com/SECRETCB29/page-9.html
http://www.radiomods.co.nz/pll02a.html
http://www.angelfire.com/tn/nap/mods.html
http://kg4zpn.netai.net/cb/talkpower.htm
http://www.nwcbradio.com/mods.htm
http://www.radiomanual.info/schemi/CB/CB_Radio_tune-up_list_mod.pdf
http://www.transmission1.co.uk/forum/viewtopic.php?f=29&t=15710
Last edited:
I had this it was the TX signal meter VR, variable resistor like a silver horseshoe, you need to find yours on a schematic.....also the RX signal VR was out.....I actually did mine with the rig upside down and set the needle to the right, when I turned the rig right way the needle was going to the left!....had to do it all again...