-
You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.
-
A Winner has been selected for the 2025 Radioddity Cyber Monday giveaway! Click Here to see who won!
Needle swings backwards, power is too low to calibrate SWR meter and scratchy audio
- Thread starter Turbo T
- Start date
PLL 02A MODS
http://www.hardtimez99.com/SECRETCB29/page-9.html
http://www.radiomods.co.nz/pll02a.html
http://www.angelfire.com/tn/nap/mods.html
http://kg4zpn.netai.net/cb/talkpower.htm
http://www.nwcbradio.com/mods.htm
http://www.radiomanual.info/schemi/CB/CB_Radio_tune-up_list_mod.pdf
http://www.transmission1.co.uk/forum/viewtopic.php?f=29&t=15710
Last edited:
I had this it was the TX signal meter VR, variable resistor like a silver horseshoe, you need to find yours on a schematic.....also the RX signal VR was out.....I actually did mine with the rig upside down and set the needle to the right, when I turned the rig right way the needle was going to the left!....had to do it all again...