• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Nordland 01 1400

TheAx

New Member
May 17, 2016
2
0
1
52
Hi!

I have a Nordland 01 1400 Base station. Looks much like the Kraco 2555FM. The transformer has blown. I want to put a new one in, but how much voltage and amperage is likely to be needed for a CB like this?
 

A 23 ch AM/FM radio . . . ?
Not much info found for it. Does it have a dual power setting for the line voltage in? Otherwise, I would guess that it steps down 120VAC to about 18-20VAC and then it would go to the voltage regulator circuit to supply 13.8VDC like most other base radios do. Have pictures of the xformer? Part # on the xformer?
 
Yes it is AM and FM 23 channels plus 11A channel.
No dual power output.
At the moment I'm using a 12v batteri. So I guess it shouldnt heard it to use 13.8v?
Any guess how many amps a radio like this needs maximum?
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ COWBOYS:
    Denton GL 1000 ham amp comes on, but will not key up
  • @ COWBOYS:
    What can I do to make my Denton GLS 1000 amp to load ?
  • @ AudioShockwav:
    Try starting a new thread in the Amplifier section and asking the question, more people will see it to respond.
  • @ iw7ed:
    hello