• You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Odd D-104 Sighting

Holydvr

Tony (The Flasher) 1776 NW Arizona
Nov 2, 2018
583
608
103
46
Golden Valley, AZ
Opened this element (beyond dead) to convert it to Ceramic with an MC-564 ceramic bar, but found this skinny “yoke” as I call them that attaches to the crystal packet. Seems this one may have had (or not) thr skinnier packet out of say an MC-151 or similar. I myself have never seen this. Original packet was grenaded, but seems to support my theory with what little is left. This element has the earlier thicker diaphragm. It was very much untouched as far as my eyes told me. What little wrinkling that can be seen is from me breaking the fossilized glue holding the diaphragm onto the puck.BADA2FCB-D5F5-42CE-AB4A-0B8389DFEB52.jpeg
 

Looks to me like the ceramic piezo element is mostly gone. Only a tiny remnant is visible. The "yoke" is meant to twist the element as the diaphragm pulls it back and forth.

Does this one say "MC321" on the rear?

73
 
The element is unmarked. Doesnt even look as if it ever had a sticker on the back. I have another that is still in the original head from late 1946 and it was similarly unmarked. I forget now how I was able to date that one at least somewhat. The destroyed crystal packet was not of the standard larger square variety some of us are used to seeing. The yoke is also about half the width as usual. Just an odd duck I suppose, as I have never seen one like this.
 

dxChat
Help Users
  • No one is chatting at the moment.
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.