Toggle sidebar Toggle sidebar
  • You can now help support WorldwideDX when you shop on Amazon at no additional cost to you! Simply follow this Shop on Amazon link first and a portion of any purchase is sent to WorldwideDX to help with site costs.

Pace 1000M Sidetalk pcb/layout

HavaV10

HavaV10

Active Member
May 24, 2023
170
36
38
57
Lake Havasu City, Arizona
Just realized I might be using the wrong schematic/board layout I found on CB Tricks. My Pace 1000M only has 2 transformers on the right while the pcb layout is showing 3 of them. Also tank coils are not in the correct orientation. Anyone know were to find the correct schematic/pcb layout for my Pace 1000M 23 channel? Thanks.
 

Attachments

  • 20230709_080026_edited.jpg
    20230709_080026_edited.jpg
    6.6 MB · Views: 7
  • Clipboard01_edited.jpg
    Clipboard01_edited.jpg
    481.1 KB · Views: 7


dxChat
Help Users
  • No one is chatting at the moment.
  • @ BJ radionut:
    +1
  • @ heartbreaker3473:
    Hello gentlemen and Ladies. I have the dreaded RCI-2990 receive issue where my radio gets distorted when people get close to my location. I found the C90 Capacitor, but I can not for the life of me find the C89 capacitor. Can or does anyone have a picture of the exact location of C89 ? Thank you in advance, Wes
  • @ AudioShockwav:
    Wes, it's better if you start a thread on the main forum, more people are going to see your question.
  • @ heartbreaker3473:
    Okay, sorry, will put in a forum
  • @ heartbreaker3473:
    I put it in the general disscution help area and started a new thread. Thank you for letting me know.


      Top Bottom